Products Name: Conveyor Belt System

Features Specifications:

Belt Pitch:46mm
Open Area:52%
Permit : FDA
Assembling Method : Connected with rods.
Standard Rod : Ø 6mm
It can curve, but can not be applied in the working environment that temperature is under 0ºC.
Add antiseptics : Acceptable
Flight : Non
Side Guard : Non
Belt Data

Belt Material	Belt Strengthkg/m (W)		Temperature		Belt Weight	Belt Color
	Straight	Curved	ºC(min.)	ºC(max.)	kg/sqm	w	G	N	NB	DB
Polypropylene	1785	135	1	100	6.4	-	-
Polyethylene	1267	78	1	60	6.9	-		-
Acetal	2780	135	1	90	9.7	-				-
Nylon	1780	78	1	140	8.9		-		-

W-White, G-Gray, N-Nature, NB-Nigger Brown, DB-Dark Blue
Product Code

Belt Material		Polypropylene	Polyethylene	Acetal	Nylon
Code	Industry	300BIP-PLUS	300BIE-PLUS	300BIC-PLUS	300BIN-PLUS
	Food	300BFP-PLUS	300BFE-PLUS	- -	- -

In Dry Environments

Belt Material	Friction between Wearstrip			Friction between Product
	UHMW	HDPE	Steel	Glass	Steel	Plastic	Cardboard	Aluminum
Polyethylene	0.32	0.18	0.15	0.09	0.13	0.08	0.15	0.25
Polypropylene	0.13	0.11	0.25	0.19	0.31	0.16	0.21	0.41
Acetal	0.09	0.09	0.17	0.16	0.26	0.15	0.19	0.28
Nylon	0.32	0.26	0.25	0.16	0.26	0.16	0.19	0.27

In Wet Environments

Belt Material	Friction between Wearstrip			Friction between Product
	UHMW	HDPE	Steel	Glass	Steel	Plastic	Cardboard	Aluminum
Polyethylene	0.11	0.09	0.24	0.08	0.10	0.08	- -	0.20
Polypropylene	0.20	0.18	0.15	0.18	0.25	0.10	- -	0.40
Acetal	0.10	0.09	0.18	0.13	0.20	0.13	- -	0.32
Nylon	0.23	0.24	0.33	0.15	0.26	0.16	- -	0.27

Conveyor Frame Dimensions & Sprockets Frame Dimensions
Unit:mm

Sprocket	A	B(min)	C(max)	T	T1	K	HW	S-HW	PD	RH	SH	Acetal	SUS304
8T	51	62	63	15	6.5	7 X 7	12	- -	120	45.5	38.5	K308C	- -
12T	80	82	94			7 X 7	12	- -	185	45.5	38.5	K312C	- -

Engagement
Sprockets must engage with the belt correctly as shown in above picture, and keep the operation in a regular and smooth condition.
Bidirectional Operation
The conveyor belt of Series 300 can make bidirectional operation when the conveyor system is proceeding. However, it is necessary to install sprockets in reverse arrangement as shown in above picture.
Sprocket Spacing of Belt
The graph above is the spacing data of sprocket center; these data are approximations and for reference only. Please give priority to the actual position that sprockets engage with belt while designing and processing.
Please refer to the curve data and set the spacing while installing sprockets. It must be allotted averagely and smaller than the curve data.
Minimum Inside Radius
The curved belt has a regular limit of the minimum inside radius; it should be over 2.2 times the width of belt.
While the conveyor belt passing through the turning position, the belts on inner side will be contracted and extruded because of the fan-shaped motion. Pay attention to if there are any transporting goods sink into the open area and not able to be extruded. Please consult with our agencies and ask for samples to test yourselves.
Concerning to the design points of curved belts, please refer to the specification of curved belts in Engineering Manual.
Traveling Direction
When the belt proceed the turning movement, please refer to the correct traveling direction of the belt in above picture before designing and installing.
Table of Width Acetal

146	393	641	889	1141	1392
170	418	667	913	1164	1416
196	444	692	936	1188	1440
219	468	718	962	1214	1489
244	492	740	988	1237	1515
270	518	765	1013	1261
295	543	789	1039	1287
320	569	814	1064	1314
344	593	839	1089	1339
369	618	864	1115	1366

Unit : mm
<1000mm : Tolerance +/- 2mm
>1000mm : Tolerance +/- 3mm
For the dimensions are not listed in the table above, please consult with us or the local agents.
Table of Width Nylon

146	399	650	901	1175	1427
172	423	675	925	1201	1452
197	448	699	951	1226	1477
222	473	725	976	1251	1502
247	498	751	1001	1276
273	523	775	1025	1301
298	549	800	1078	1326
323	574	825	1102	1351
348	599	851	1126	1376
372	624	875	1151	1402

Unit : mm
<1000mm : Tolerance +/- 2mm
>1000mm : Tolerance +/- 3mm
For the dimensions are not listed in the table above, please consult with us or the local agents.
Table of Width Polyethylene (PE)

143	390	635	881	1128	1374
167	415	660	906	1152	1399
191	439	683	931	1176	1423
216	464	708	956	1201	1448
241	489	733	982	1226	1472
266	512	758	1005	1251	1497
290	537	781	1031	1275	1523
316	562	806	1055	1299
340	588	831	1078	1325
363	612	856	1103	1348

Unit : mm
<1000mm : Tolerance +/- 2mm
>1000mm : Tolerance +/- 3mm
For the dimensions are not listed in the table above, please consult with us or the local agents.
Table of Width Polypropylene (PP)

145	443	692	944	1189	1443
170	468	718	966	1214	1470
195	493	741	993	1240	1496
220	519	769	1018	1264	1522
245	544	793	1041	1289
270	568	818	1066	1315
294	594	843	1090	1341
319	618	868	1116	1366
344	644	893	1140	1391
369	668	918	1165	1417

Unit : mm
<1000mm : Tolerance +/- 2mm
>1000mm : Tolerance +/- 3mm
For the dimensions are not listed in the table above, please consult with us or the local agents.
Application Restriction
Please carefully study the instructions on the engineering manual before any application of EASECON conveyor belt.
Do not apply the conveyor belt in any high temperature baking, hot oil frying and direct firing environment.
Static Electricity will generate due to the friction when EASECON belt is applied in dry environment.
If the conveyor belt is applied in the environment which is not listed in the the safe Factor in the manual, EASECON conveyor belt may not suitable for the application.
For the application of contacting with chemical materials, please refer to Chemical Resistance Guide.
The information of the Engineering Manual is for reference only. EASECON does not take responsible for the property damage, personal injury, damage and failure caused by the improper design, application, installation, operation and so on.
If you would like to discuss the CAD design drawing with us, we recommend you to provide the file in DWG or DGN format and send it to us. For the reply to all inquiries, we also provide file in DWG or DGN format only.
Patents & Copyright
Efficiency And Service Engineering Co., Ltd manufacture products under one or more of the following (Taiwan) R. O. C & (Mainland China) P. R. O. C Patents Registration :
EASECON Series Product Patent in District of ROC: New Module No. 95130, 100753, 105242, 143596, 143844, 150953
EASECON Series Product Patent in District of PROC:ZL94245924.5, ZL94245926.1, ZL94246984.4, ZL95220931.4
EASECON Enterprise Co., Ltd. Product Trademark Registration (Taiwan):00693073, 00716519, 00780058, 00784651
EASECON Enterprise Co., Ltd. Product Trademark Registration (Mainland, China):886653
EASECON Engineering Manual Intellectual Property Copyright No. 8507459