Products Name: Conveyor Belt System

Features Specifications:

Belt Pitch:25mm
Open Area:16%
Permit : FDA
Assembling Method : Connecting with rods.
Standard Rod : Ø 5mm
Add antiseptics : Acceptable
Stainless Steel Rod & Link : Acceptable.
Flight : Non
Side Guard : Non
Curve : Non
Belt Data

Belt Material	Belt Strength	Temperature		Belt Weight	Belt Color
	kg / m ( W )	ºC (min.)	ºC (max.)	kg / sq m	w	G	N	NB	DB
Polypropylene	1010	1	100	8.2	-	-
Polyethylene	980	-40	60	8.9	-		-
Acetal	1640	-40	90	12.8	-			-	-
Nylon	1450	-40	140	11.7				-

W-White, G-Gray, N-Nature, NB-Nigger Brown, DB-Dark Blue
Product Code

Belt Material		Polypropylene	Polyethylene	Acetal	Nylon
Code	Industry	502BIP	502BIE	502BIC	502BIN
	Food	502BFP	502BFE	- -	- -

In Dry Environments

Belt Material	Friction between Wearstrip			Friction between Product
	UHMW	HDPE	Steel	Glass	Steel	Plastic	Cardboard	Aluminum
Polyethylene	0.32	0.18	0.15	0.09	0.13	0.08	0.15	0.25
Polypropylene	0.13	0.11	0.25	0.19	0.31	0.16	0.21	0.41
Acetal	0.09	0.09	0.17	0.16	0.26	0.15	0.19	0.28
Nylon	0.32	0.26	0.25	0.16	0.26	0.16	0.19	0.27

In Wet Environments

Belt Material	Friction between Wearstrip			Friction between Product
	UHMW	HDPE	Steel	Glass	Steel	Plastic	Cardboard	Aluminum
Polyethylene	0.11	0.09	0.24	0.08	0.10	0.08	- -	0.20
Polypropylene	0.20	0.18	0.15	0.18	0.25	0.10	- -	0.40
Acetal	0.10	0.09	0.18	0.13	0.20	0.13	- -	0.32
Nylon	0.23	0.24	0.33	0.15	0.26	0.16	- -	0.27

Conveyor Frame Dimensions & Sprockets Frame Dimensions
Unit:mm

Sprocket	A	B(min)	C(max)	T	K	HW	S-HW	PD	RH	SH	Acetal	S-Steel
12T	41	52	53	13	7 X 7	10.5	5	93	45.5	38.5	-	-
24T	89	100	102		7 X 7	10.5	5	190	45.5	38.5	-	-

Pay for manufacturing particular dimensions of Stainless Steel Sprocket Axle Bore is acceptable.
S-HW is the hub dimension of Stainless Steel Drive Sprocket.
Engagement
Sprockets must engage with the belt correctly as shown in above picture, and keep the operation in a regular and smooth condition.
Bidirectional Operation
The conveyor belt of Series 500 can make bidirectional operation when the conveyor system is proceeding. However, it is necessary to install sprockets in reverse arrangement as shown in above picture.
Sprocket Spacing of Belt
The graph above is the spacing data of sprocket center; these data are approximations and for reference only. Please give priority to the actual position that sprockets engage with belt while designing and processing.
Please refer to the curve data and set the spacing while installing sprockets. It must be allotted averagely and smaller than the curve data.
Table of Width Polypropylene (PP)

178	389	599	809	1019	1229
200	410	620	830	1040	1250
221	431	641	851	1061	1271
242	452	662	872	1082	1292
263	473	683	893	1103	1313
284	494	704	914	1124
305	515	725	935	1145
326	536	746	956	1160
347	557	767	977	1187
368	578	788	998	1208

Unit : mm
<1000mm : Tolerance +/- 2mm
>1000mm : Tolerance +/- 3mm
For the dimensions are not listed in the table above, please consult with us or the local agents.
Steel Link
In order to increase the belt tensile strength and make the heavier loading design in conveyance, you can choose to install stainless steel links; there is no limit to the lines of arrangement. However, the plastic rods should be replaced by stainless steel rods.
The rate of thermal expansion and contraction will be replaced after installing stainless steel links. It is very suitable to apply in the steam or boil environment with high temperature; it is also suitable for IQF conveyance.
For the specification of stainless steel link, please refer to Engineering Manual.
After installing stainless steel rods, the weight of the conveyor belt will increase about 64%.
The weight of steel links is 0.11kg per meter.
Application Restriction
Please carefully study the instructions on the engineering manual before any application of EASECON conveyor belt.
Do not apply the conveyor belt in any high temperature baking, hot oil frying and direct firing environment.
Static Electricity will generate due to the friction when EASECON belt is applied in dry environment.
If the conveyor belt is applied in the environment which is not listed in the the safe Factor in the manual, EASECON conveyor belt may not suitable for the application.
For the application of contacting with chemical materials, please refer to Chemical Resistance Guide.
The information of the Engineering Manual is for reference only. EASECON does not take responsible for the property damage, personal injury, damage and failure caused by the improper design, application, installation, operation and so on.
If you would like to discuss the CAD design drawing with us, we recommend you to provide the file in DWG or DGN format and send it to us. For the reply to all inquiries, we also provide file in DWG or DGN format only.
Patents & Copyright
Efficiency And Service Engineering Co., Ltd manufacture products under one or more of the following (Taiwan) R. O. C & (Mainland China) P. R. O. C Patents Registration :
EASECON Series Product Patent in District of ROC: New Module No. 95130, 100753, 105242, 143596, 143844, 150953
EASECON Series Product Patent in District of PROC:ZL94245924.5, ZL94245926.1, ZL94246984.4, ZL95220931.4
EASECON Enterprise Co., Ltd. Product Trademark Registration (Taiwan):00693073, 00716519, 00780058, 00784651
EASECON Enterprise Co., Ltd. Product Trademark Registration (Mainland, China):886653
EASECON Engineering Manual Intellectual Property Copyright No. 8507459